CAKEWALK SONAR - Page 156

156
For step-by-step instructions, see the following procedures:
To Hide or Show the Video Thumbnails Pane
• Drag the splitter bar that separates the Video Thumbnails pane from the
Clips pane.
Or
•Use the View-Video Thumbnails menu command.
Or
• Click the Show/Hide Video Pane button in the Track view toolbar.
To Turn Video Thumbnails On or Off
1. Right-click the Video Thumbnails pane or the Video Thumbnails track strip.
2. Choose Show/Hide Thumbnails from the popup menu that appears.
Or
• Click the Show/Hide Thumbnails button in the Track view toolbar.
To Hide or Show Frame Numbers on Frames
• In the video track strip, click the Show/Hide Frame Numbers button .
To Open the Video Properties Dialog
• Double-click the video track strip.
To Open the Video View
• Double-click the Video Thumbnails pane.
To Move the Now Time to a Thumbnail
• Click the thumbnail.
To Change the Start Time
• In the video track strip, click the Start field, type a new number in Measure/
Beat/Tick format, and press Enter. The start time is the time in your SONAR
project at which your video starts to play.
To Change the Trim-In Time
• In the video track strip, click the Trim-In field, type a new number in SMPTE
format, and press Enter (you can press the Spacebar instead of typing colons,
if you want, and you can type single zeros instead of double zeros). The trim-in
time is the time in your video file at which you want to start video playback.
To Change the Trim-Out Time
• In the video track strip, click the Trim-Out field, type a new number in
SMPTE format, and press Enter (you can press the Spacebar instead of typing
colons, if you want, and you can type single zeros instead of double zeros). The
trim-out time is the time in your video file at which you want to stop video
playback.