167
Your tempo and metronome settings are now ready. When you save the project file,
the metronome and tempo settings will be saved as well.
To Change Your Metronome Settings
1. Open the Metronome Settings dialog box in one of the following ways:
• Click Metronome Settings in the Metronome toolbar.
• Choose Options-Project and click the Metronome tab.
2. Change the metronome settings as indicated in the following table:
3. Click OK.
Your metronome settings will be saved with the project file.
To Set the MIDI Metronome Sounds from your MIDI Instrument
1. Select a track in the Track view that is assigned to the MIDI device you want
to use for the metronome sound.
2. Click Metronome Settings in the Metronome toolbar to open the Project
Options dialog box.
3. Make sure that the settings in the Output and Channel fields match those for
the track in the Track view.
4. Click on the Key box in the First Beat or the Other Beats section.
5. Play a note on your MIDI instrument. The note number is entered
automatically. The velocity is not updated.
6. Click OK.
Your metronome settings will be saved with the project file.
To do this… Do this…
Enable the metronome during
playback
Check Playback
Enable the metronome during
recording
Check Recording
Enable the count-in Enter the number of clicks for the count-
in in the Count-in box, and select
Measures or Beats
Accent the first beat of each
measure
Check Accent First Beat
Use the audio Check Use Audio Metronome
Use a MIDI note as the sound Check Use MIDI Note and choose the
output, channel, and other settings
To Next Page
Loading...