317
controllers of the type you have selected already exist in the time region, SONAR
deletes these before inserting the new ones.
To Remove or Erase Controllers
1. Choose the data type, controller or xRPN number, and channel (if applicable)
from the lists in the toolbar.
2. Select the Eraser tool .
3. Drag the mouse over the desired region to highlight the region you want to
erase.
4. Release the mouse button when you have highlighted the desired region.
SONAR deletes all controllers of the selected type. (Note that you cannot delete
velocity events in the Controllers pane. You must delete the notes that have those
velocities.)
To Convert MIDI Controller Envelopes to Shapes
1. In the Clips pane, select the time range and track(s) that contain the
controller data you want to convert.
2. Use the Edit-Convert MIDI To Shapes command.
The Convert MIDI To Shapes dialog box appears.
3. In the Type field, select the type of controller you want to convert.
4. In the Value field, select the controller number of the controller you want to
convert. For example, if you’re converting a volume envelope to a shape, select
7.
5. In the Channel field, select the channel of the controller you want to convert,
and click OK.
SONAR converts the Piano Roll view controller envelope you selected to a Track
view shape that controls the same parameter.
Note: If two clips overlap, the Edit-Convert MIDI To Shapes command converts
the controller envelopes in both clips, in whatever parts of the clips lie in the
selected time range.
To Next Page
Loading...