421
Sound controls in the Console view are grouped in modules. There are four types
of modules:
One module’s name is always outlined with a white line. This corresponds to the
track with the focus. You can change the focus by clicking to the right of the
module’s volume fader.
Module type... What you can do...
MIDI track Set the track’s output, channel, bank, and patch; set the input;
mute, solo, and arm the track; set channel volume, panning,
chorus, and reverb levels; add real-time effects
Audio track Set the track’s output (bus or Main out destination); choose an
input; monitor input levels; mute, solo, and arm the track; set
track volume and panning; add real-time effects; send audio
data to buses or main outs.
Bus Receive input from one or more audio tracks, add real-time
effects, and send the results to a main out or another bus
Main outs Monitor output levels using meters and control the stereo
volume of audio to an output on your audio interface. To adjust
both the left and right volume levels at the same time, use the
Link button
for that module.
To Next Page
Loading...