427
To Delete a Bus
1. Right-click in the Bus pane over an existing bus.
2. Select Delete Bus from the menu that appears.
The bus is deleted from the Bus pane.
Note: If you have any track or bus routed through the bus you delete, the signal
will be rerouted to the bus’s output.
To Create a Bus Send in a Track
1. Right-click in an empty part of the Track pane (Track view) or a track module
(Console view).
2. Select Insert Send for a list of buses available.
3. Select a bus from the list.
To Set the Snap-to Position of a Knob or Fader
1. Set the control to the desired position.
2. Right-click on the control and choose Set Snap-To=Current.
From now on, the control returns to this position when double-clicked.
To Insert a New Track
1. Right-click on an empty area in the Console view or on the title bar of a track
in the Track view.
2. Choose Insert Audio Track or Insert MIDI Track.
SONAR adds a new track to the project.
To Rename a Track or Bus
1. In the Console view, click on the module name. In the Track view double-click
on the Track name.
2. Type a new name.
3. Press Enter.
If you rename a track, the new name is copied to the Track view. If no name has
been assigned to a track, the Console view and Track view display the track’s
number.
To Link Left/Right Faders in a Console View Module
1. In the module whose faders you want to link, adjust the volume of each fader
to the appropriate level.
2. Click the Link button .
To Next Page
Loading...