426
To Hide a Bus or Track
• Right-click on the module and choose Hide Track or Hide Bus.
To Narrow a Module (Console view only)
1. Right-click in the space next to the module’s volume fader.
2. Select Narrow Strip from the menu that appears.
To Narrow or Widen all Modules in the Console View
• Click the Narrow/Widen Modules button .
To Display Meters in the Console View
• Click the Show Meters button .
To Customize the Meter Display in the Console View
You can choose which meters you want to display in the Console view. Hiding
meters helps to conserve CPU cycles, potentially giving you more power for real-
time plug-ins or simultaneous tracks.
1. Click the down arrow next to the Show Meters button .
2. Select Track Record Meters, Track Playback Meters, Bus Meters or
Mains Meters from the menu that appears.
To Show or Hide Meters in the Track View
• Click the Show/Hide Meters button to display all meters or click on the
arrow to the right of the Show/Hide Meters button to display only the meters
you want to see or to customize the appearance of your meters.
For more information about metering options, see “Changing the Meters’ Display”
on page 438.
To Change a Meter’s Range
• Right-click on the meter and choose a new range.
To Add a Bus
1. Right-click in the Bus pane (to add a bus at the end of the current buses) or
over an existing bus (to add a bus before it).
2. Select Insert Bus from the menu that appears.
A bus appears in the Bus pane.
Option… What it does…
Record meters Displays record meters for any armed track.
Playback meters Displays playback meters.
Output bus meters Displays meters in buses
To Next Page
Loading...