452
When you have defined a custom group, you can adjust the starting and ending
position of each control using the Group Settings dialog box or using popup menus
on the controls in the group.
To Add a Control to a Group
1. Right-click on the control.
2. Choose a group from the Group submenu.
SONAR adds the control to the group. Controls, knobs and faders are highlighted
with the group’s color indicator.
To Remove a Control from Its Group
1. Right-click on the control.
2. Choose Ungroup from the menu.
SONAR removes the control from the group and displays the control with the
neutral color indicator.
To Override a Control’s Grouping
• Hold down the Ctrl key while moving the control.
The control remains part of the group and functions as such once the Ctrl key is
lifted.
To Set the Group Type to Relative or Absolute
1. Right-click on any control in the group and choose Group Properties to
display the Group Properties dialog box.
2. Choose Absolute or Relative as the group type and click OK.
SONAR uses the type to determine the range of motion for the group’s controls.
To Next Page
Loading...