464
If you chose Broadcast Wave as the export format, the following information is
stored in the file(s):
• Description—A brief description of the contents of the Broadcast wave.
Limited to 256 characters.
• Originator—The author of the Broadcast wave. This information is taken from
the Author field in the File Info dialog.
• Originator Reference—A unique reference identifier created by SONAR.
• Origination Date—The date the file was created.
• Origination Time—The time the file was created.
• Time Reference—The SMPTE time stamp for the beginning of broadcast
wave.
To Export a Project in Windows Media Format
1. Set all volume, pan, effects, and automation settings just as you want them.
2. If you only want to mix down parts of tracks, select those clips now.
3. If you are using effects on the tracks and want to mix the effects down at this
time, select the whole length of the longest track or clip plus extra time for the
reverb or effects “tail.”
4. Choose File-Export-Audio to open the Export Audio dialog box.
5. Select a destination folder using the Look In field.
6. Enter a file name.
7. Choose Windows Media Advanced Streaming Format from the Files of type
dropdown list.
8. In the Source Category field, select one of the following options:
• Tracks—choosing this option creates a separate file for each track that
you select in the Source Buses/Tracks field.
• Buses—choosing this option creates a separate file for each bus that you
select in the Source Buses/Tracks field.
• Main Outputs—choosing this option creates a separate file for each main
output that you select in the Source Buses/Tracks field.
• Entire Mix—choosing this option creates one file for your entire mix,
unless you’re exporting a surround mix with Split Mono selected in the
Channel Format field.
9. In the Source Buses/Tracks field, choose the buses or tracks you want to use as
a source to create your mix. If you chose Tracks in the Source Category field,
only tracks will show up as choices in this field.
To Next Page
Loading...