Canon LBP6780x - Functions Which Can Be Specified from the Control Panel

0978-065
This printer allows you to specify the printing functions from the printer driver. However, some printing functions are
specified from the control panel or the Remote UI. The following table shows the functions to be specified from the control
panel or the Remote UI.
For details on the items you can manage using the control panel, see "Setting Items."
Function Overview of the Function
Multi-purpose tray
paper size
Specifies the size of the paper loaded in the multi-purpose tray.
"[Setup] Menu ([Paper Source] Options)"
"[Select Feeder] Menu"
Multi-purpose tray
priority
Specifies whether the printer should detect the paper source in order starting with the multi-
purpose tray.
"[Setup] Menu ([Paper Source] Options)"
"[Select Feeder] Menu"
Drawer N (N=1, 2,
3) size
Specifies the size of the paper loaded in the paper drawer (Drawer 1 or 2).
"[Setup] Menu ([Paper Source] Options)"
"[Select Feeder] Menu"
Standard paper size
Since paper size cannot be specified when printing from DOS, UNIX or other operating system,
specify it using this setting.
"[Setup] Menu ([Paper Source] Options)"
"[Select Feeder] Menu"
Diff. paper tray
Specifies whether to use the multi-purpose tray when the paper settings for the selected paper
source are not the same as the paper settings in the received data.
"[Setup] Menu ([Paper Source] Options)"
"[Select Feeder] Menu"
Auto selection
Specifies the paper source to be automatically selected.
"[Setup] Menu ([Paper Source] Options)"
"[Select Feeder] Menu"
Standard paper type
Since paper type cannot be specified when printing from DOS, UNIX or other operating system,
specify it using this setting.
"[Setup] Menu ([Paper Source] Options)"
"[Select Feeder] Menu"
Adjust Print Position
Adjusts the printing position in the vertical direction (Y) or the horizontal direction (X).
"[Setup] Menu ([Layout] Options)"
"[Setup] Menu ([User Maintenance] Options)"
Alternative method
If the last page for the 2-sided printing is 1-sided printing, 1-sided printing is applied to the last
page.
"[Setup] Menu ([Layout] Options)"
Image Refinement
Set whether to use the smoothing process to print the jagged edges of text and graphics.
"[Setup] Menu ([Quality] Options)"
Recovery printing
Specifies whether to print the partially printed page when the printer stops printing due to a
paper jam or an error occurring.
"[Setup] Menu ([User Maintenance] Options)"
Check paper size
Specifies whether the printer should stop printing, displaying the message <Check paper size.>
or continue printing.
"[Setup] Menu ([User Maintenance] Options)"
Substitute size
The printer switches the paper size if the paper of the size to be used is not loaded in the
printer.
"[Setup] Menu ([User Maintenance] Options)"
Plain paper curl
adjustment
If printed plain paper curls, specify the setting for this item.
Functions Which Can Be Specified from the Control Panel
㻞㻢㻣㻌㻛㻌㻥㻣㻜