Canon LBP6780x - Reset] Menu

0978-0C3
Setting Item
Setting
Value
Setting
[Soft Reset] ([Hard
Reset])
-
Resets the printer when a problem is occurring or you want to cancel printing.
"Canceling the Process Currently Being Performed (Soft Reset)"
"Canceling All the Jobs (Hard Reset)"
[Form Feed] -
When a job is canceled from the computer or the data is less than one page, the
data may remain in the printer memory, and the job may not be completed properly.
As long as the printer remains in this state, you cannot print the next job because
the printer cannot receive the next data. In this case, force the printer to output the
print data using the procedure for this item.
"Outputting Data (Forced Output)"
[Shut Down] -
Shuts down the functions of the printer.
If you are using WSD printing, the shutdown notifies the computer that the printer is
turned OFF.
After executing a shutdown, the printer cannot receive data, and panel operation
becomes invalid.
Cycle the power of the printer if you want to print the data again.
Turning the Printer ON/OFF
[Reset] Menu
㻡㻥㻡㻌㻛㻌㻥㻣㻜