0978-0A2
In FTP Client, you can specify the network settings, security settings, and so on by accessing the FTP server of the printer
using Command Prompt.
<Features of FTP Client>
No specific software is needed.
You can operate the FTP Client using the Command Prompt supplied with Windows. You do not need specific
software to operate the FTP Client.
You can specify the network settings at a time.
Because the setting items are listed in a file, you can specify multiple items all at once.
To manage the printer using FTP Client, perform the following procedure.
IMPORTANT
If the [FTP Settings] check box is not selected in the [TCP/IP Settings] page in [Settings/Registration] - [Preferences] -
[Network], settings cannot be specified from the FTP client.
"Configuring the Protocol Settings"
NOTE
For Macintosh users
For details on the procedure for Macintosh, see "FTP Client (Macintosh)."
1
Run Command Prompt.
NOTE
If you are using Windows
Run Command Prompt using the following procedure.
)URPWKH>6WDUW@PHQXVHOHFW>$OO3URJUDPV@RU>3URJUDPV@ĺ>$FFHVVRULHV@ĺ>&RPPDQG3URPSW@
If you are using UNIX
Display the console screen.
2
Enter "ftp <the IP address of the printer>", and then press the [ENTER] key on your keyboard.
Input Example: "ftp 192.168.0.215"
If you are not sure about the IP address of the printer
Print and confirm Network Status Print while referring to "Checking the Printer Settings", or consult your network
administrator.
3
Enter "root" as the user name, and then press the [ENTER] key on your keyboard.
4
FTP Client
㻡㻡㻞㻌㻛㻌㻥㻣㻜
To Next Page
Loading...
