0978-0LS
Perform one of the following solutions according to the cause.
<Cause 1 > Here is data remaining in the memory. (The (Job) indicator is on.)
Solution
Press [
] ( : Online) to place the printer offline, and then select [Form Feed] in the Reset menu.
"Outputting Data (Forced Output)"
<Cause 2> The keylock function is enabled. (The "Pi" alarm sounds when the key is pressed
and <Key locked.> appears in the display.)
Solution Disable the keylock function from the Remote UI. Contact the printer administrator.
The Keys on the Control Panel Do Not Function
㻥㻠㻜㻌㻛㻌㻥㻣㻜
To Next Page
Loading...
