0978-0LE
Perform the following procedure.
<Cause> The command that notifies of the end of the data is not sent from the computer. (The
(Job) indicator is on.)
Solution
Press [
] ( : Online) to place the printer offline, and then select [Form Feed] in the Reset menu.
"Outputting Data (Forced Output)"
If you print using an application that does not have a printing function, [Form Feed] is performed
because the last page in which data is less than one page remains in the memory.
The Last Page Cannot Be Printed
㻥㻟㻞㻌㻛㻌㻥㻣㻜
To Next Page
Loading...
