0978-0KJ
Perform one of the following solutions according to the cause.
<Cause 1> Damp paper is used.
Solution 1
Replace the paper with new paper in an unopened package.
"Precautions for Paper"
Solution 2
Solution 2-1
If [Paper Type] is set to [Plain] in the printer driver, specify [Plain L], and then print again.
"Configuring the Printer Driver and Printing"
The toner may not fix onto paper well, and the printing may come out faint.
Solution 2-2
If the problem is not solved, perform the following procedure in the printer driver.
1. Display the [Finishing] tab.
2. Click [Advanced Settings].
3. Set [Special Print Adjustment C] to [On].
You can specify the same setting from the printer's control panel.
"[Setup] Menu ([User Maintenance] Options)"
If you specify this setting, printing speed drops.
The setting applies only to A4 or Letter size paper.
Solution 2-3
If the problem is not solved, select the tray or the drawer from which the printer feeds paper from [Curl
Correction] in [Special Print Mode] on the printer's control panel, specify [On], and then print again.
"[Setup] Menu ([User Maintenance] Options)"
If you specify this setting, the printing speed drops more than when [Special Print Adj. C] is set to
[On].
Solution 2-4
If the problem is not solved, specify [Off] in Solution 2-3, and then perform the following procedure in the
printer driver.
1. Display the [Finishing] tab.
2. Click [Advanced Settings].
3. Set [Curl Adjustment] to [On].
If you specify this setting, the printing speed drops more than when [Curl Correction] is set to [On]
Paper Curls
㻥㻜㻤㻌㻛㻌㻥㻣㻜
To Next Page
Loading...
