Canon LBP6780x - Data Is Reduced and Printed

0978-0L7
Perform the following procedure.
<Cause> The setting for the scaling factor is not appropriate.
Solution 1
Perform the following procedure in the printer driver.
1. Display the [Page Setup] tab.
2. Clear the [Manual Scaling] check box.
If the [Manual Scaling] check box is cleared, the scale factor will be set according to [Page Size]
and [Output Size] automatically.
Solution 2
Perform the following procedure in the printer driver.
1. Display the [Page Setup] tab.
2. Select the [Manual Scaling] check box, and then specify an appropriate scale factor according
to the paper size to be used.
Data Is Reduced and Printed
㻥㻞㻣㻌㻛㻌㻥㻣㻜