Canon LBP6780x - Setup] Menu ([User Maintenance] Options)

0978-0AJ
NOTE
Table description
Bold values in the table indicate the default settings.
The setting items or setting values with "*" may not be displayed depending on the availability of the optional
accessories and other settings.
Setting Item Setting Value Setting
[Adj. Start Position]
[Offset Y
(MP
Tray)]: -
5.0 to 0.0
to +5.0
(mm)
[Offset X
(MP
Tray)]: -
5.0 to 0.0
to +5.0
(mm)
[Offset Y
(Drawer
1)]: -5.0 to
0.0 to
+5.0 (mm)
[Offset X
(Drawer
1)]: -5.0 to
0.0 to
+5.0 (mm)
[Offset Y
(Drawer
2)]
*
: -5.0
to 0.0 to
+5.0 (mm)
[Offset X
(Drawer
2)]
*
: -5.0
to 0.0 to
+5.0 (mm)
[Offset Y
(Drawer
3)]
*
: -0.20
to 0.00 to
+0.20 (in.)
[Offset X
(Drawer
3)]
*
: -0.20
to 0.00 to
+0.20 (in.)
[Offset Y
(2-Sided)]:
-5.0 to
0.0 to
+5.0 (mm)
[Offset X
Specifies the printing position of the paper in the specified paper source.
Adjusts the position in the vertical direction (Y) or the horizontal direction
(X) by the specified value.
The setting values are indicated in millimeters (mm), and you can adjust the
position using [
] and [ ].
If you do not adjust the printing position, specify [0.0] for this item.
Adjust the printing position for 2-sided printing as follows.
Adjust the printing position of the first page using [Offset Y (2-Sided)]
and [Offset X (2-Sided)].
The printing position of the second page depends on the settings for
each paper source.
If any part of the print image lies outside the printable area after
adjusting the printing position, the part will be missing in the print
result.
"Adjusting the Printing Position for Each Paper Source"
[Setup] Menu ([User Maintenance] Options)
㻡㻣㻥㻌㻛㻌㻥㻣㻜