Canon LBP6780x - Installing the System Options;MEAP Applications

0978-0CU
The procedures to install the system options or MEAP applications on the printer differ, depending on whether the printer is
connected or not to an outside network. Select the procedure that matches your conditions using the references below.
Installing by Connecting this Printer to an Outside Network
Install from the Remote UI.
NOTE
Communication test
To check that the transmission with the delivery server is properly operating, if necessary, perform a communication test
before installation.
"Testing Communication Using the Remote UI"
Installing by Not Connecting this Printer to an Outside Network
Installing System Options
Install using one of the following procedures.
NOTE
If you install multiple system options
We recommend that you install from the Remote UI.
Procedure Necessary Steps Reference Page
Using the Remote
UI to install
1. Obtain the license file from the License
Management System
"Obtaining the License File"
2. Install the license file using the Remote
UI
"Installing the System Options Using
the Remote UI"
Installing MEAP Applications
Use the following procedure to install.
Procedure Necessary Steps Reference Page
Using the Remote
UI to install
1. Obtain the license file from the License
Management System
"Obtaining the License File"
2. Install the license file and application file
using the Remote UI
"Installing the MEAP Applications
Using the Remote UI"
3. Start the MEAP applications from SMS
"Starting the MEAP Applications"
Installing the System Options/MEAP Applications
㻢㻟㻝㻌㻛㻌㻥㻣㻜