Canon LBP6780x - Setting the IP Address Using the Printers Control Panel

0978-08C
To set the IP address using the printer's control panel, use the following menu hierarchies.
*
[Protocol] is displayed when [IP Mode] is set to [Auto].
Pressing [ ] ( : Settings) displays the common Setup menu.
indicates that the procedure is performed by pressing [ ] or [ ] on the control panel.
indicates that the procedure is performed by pressing [OK] on the control panel.
IMPORTANT
After setting the IP address
To enable the settings, perform a hard reset or restart the printer.
For details on a hard reset, see "Canceling All the Jobs (Hard Reset)."
To go back up the hierarchy
Press [
] ( : Back).
About the control panel
For details on the control panel, see "Control Panel."
1
Press [ ] ( : Settings), select [Network] using [ ] and [ ], and then press [OK].
When the message is displayed, press [OK].
You can specify the settings when the printer is either online (the (Online) indicator is on) or offline (the
(Online) indicator is off).
Setting the IP Address Using the Printer's Control Panel
㻠㻝㻤㻌㻛㻌㻥㻣㻜