Canon LBP6780x - Setting the Printer to a Static IP Address

0978-08E
1
Press [ ] ( : Settings), select [Network] using [ ] or [ ], and then press [OK].
When the message appears, press [OK].
You can configure the settings, regardless of whether the printer is online (with the [ ] ( : Online) indicator turned
on) or offline (with the [
] ( : Online) indicator turned off).
2
Select [TCP/IP Settings] using [ ] or [ ], and then press [OK].
3
Select [IPv4 Settings] using [ ] or [ ], and then press [OK].
4
Enable [IPv4 Settings].
(1): Select [IPv4] using [
] or [ ], and then press [OK].
(2): Select [On] using [
] or [ ], and then press [OK].
5
Select how to configure the IP address.
(1): Select [IP Mode] using [
] or [ ], and then press [OK].
(2): Select [Manual] using [
] or [ ], and then press [OK].
6
Configure the IP address.
(1): Select [IP Address Settings] using [
] or [ ], and then press [OK].
(2): Select [IP Address] using [
] or [ ], and then press [OK].
(3): Configure [IP Address].
NOTE
How to enter values in [IP Address]
1. Move between the fields (four sets of up to three decimal numbers separated by periods) using [
] or [ ]
when entering the IP address you want to configure. (The values in the selected field start flashing for you to
enter the address.)
2. Enter the values. (Press [
] to increase the value and press [ ] to decrease the value.)
Setting the Printer to a Static IP Address
㻠㻞㻝㻌㻛㻌㻥㻣㻜