When deleting security policies
(1) Click [Delete] on the security policy you wish to delete.
(2) Click [OK].
When changing the priority of security policies
The higher up the list the security policy is, the higher its priority.
Click [Raise Priority] or [Lower Priority] for the security policy whose priority you wish to change, and change the priority.
3
Perform a hard reset or restart the printer.
ĺ After performing a hard reset or restarting the printer, the settings are effective.
NOTE
To perform a hard reset
You can perform a hard reset using the following procedure.
1. Click [Settings/Registration].
2. Select [Device Control] from the [Output/Control] menu.
3. Select [Hard Reset], and then click [Execute].
㻣㻟㻠㻌㻛㻌㻥㻣㻜
To Next Page
Loading...
