After wiping off the dirt, wipe the printer with a dry cloth.
4
When the printer is completely dry, connect the removed cable or cord.
<How to connect the cable or cord>
USB cable
*
Connect to the USB connector on the printer.
LAN cable
*
Connect to the LAN connector on the printer.
Power cord
(1) Plug the power cord to the power socket on the printer.
(2) Plug the power plug in the AC power outlet.
*
Whether the cable is connected or not varies depending on your environment.
㻤㻥㻌㻛㻌㻥㻣㻜
To Next Page
Loading...
