Canon LBP6780x - Page 892

E001-nnnn ("n" represents a number.)
<Cause> A problem is occurring with the fixing unit of the printer.
Solution
Follow the procedure in "If a Fixing Unit Error Is Displayed" in "The Message Indicator Is On", and then
contact your local authorized Canon dealer.
E003-nnnn ("n" represents a number.)
<Cause> A problem is occurring with the fixing unit of the printer.
Solution
Follow the procedure in "If a Fixing Unit Error Is Displayed" in "The Message Indicator Is On", and then
contact your local authorized Canon dealer.
E004-nnnn ("n" represents a number.)
<Cause> A problem is occurring with the fixing unit of the printer.
Solution
Follow the procedure in "If a Fixing Unit Error Is Displayed" in "The Message Indicator Is On", and then
contact your local authorized Canon dealer.
1F Output tray is full.
<Cause> The output tray is filled to the limit.
Solution Remove the paper in the output tray.
80 Do not turn the main power OFF.
<Cause> A MEAP application is running.
Solution
When the running of the MEAP application stops, the message disappears automatically. Wait until the
message disappears.
BT Clock error.
<Cause> The clock in this printer has a problem.
Solution
Though printing is possible as is, logs such as the job histories cannot be recorded correctly. Contact your
local authorized Canon dealer.
EM E-Mail access error.
<Cause> The printer could not connect to the POP3 server because an error had occurred in its hard
disk.
Solution Clear the hard disk error on the POP3 server.
EM POP3 server error.
<Cause> The printer could not connect to the POP3/SMTP server when printing e-mails, or the settings
for the POP3/SMTP server are not correct.
Check the error in detail using the Remote UI or Network Status Print.
㻤㻥㻞㻌㻛㻌㻥㻣㻜