0978-0LH
Perform the following procedure.
<Cause> This problem may occur in some applications depending on the processing type of
the print data.
Solution
If you are using the PCL/UFR II printer driver, performing the following procedure may be able to solve the
problem.
1. Display the [Finishing] tab.
2. Click [Advanced Settings].
3. Change the [EMF Spooling] setting.
The Printout Is Different from What Is Displayed on Screen (Windows XP
and Server 2003)
㻥㻟㻠㻌㻛㻌㻥㻣㻜
To Next Page
Loading...
