Cisco MDS 9000 Series Configuration Guide

config# zone-attribute-group name <name> vsan 1
config-attribute-group# disable-smart-zoning
config-attribute-group# exit
config# zone commit vsan 1
Displays how to Auto-convert Zones
config# show zoneset vsan 1
zoneset name ZSv1 vsan 1
zone name ddasZone vsan 1
device-alias Init1
device-alias Init2
device-alias Init3
device-alias Target1
config# zone convert smart-zoning vsan 1
smart-zoning auto_convert initiated. This operation can take few minutes. Please wait..
config# show zoneset vsan1
zoneset name ZSv1 vsan 1
zone name ddasZone vsan 1
device-alias Init1 init
device-alias Init2 init
device-alias Init3 init
device-alias Target1 target
Displays how to Clear Device type Configuration for Members
config# show zoneset vsan 1
zoneset name ZSv1 vsan 1
zone name ddasZone vsan 1
device-alias Init1 init
device-alias Init2 init
device-alias Init3 init
device-alias Target1 target
config# clear zone smart-zoning vsan1
config# show zoneset vsan 1
zoneset name ZSv1 vsan 1
zone name ddasZone vsan 1
device-alias Init1
device-alias Init2
device-alias Init3
device-alias Target1
Enhanced Zoning
The zoning feature complies with the FC-GS-4 and FC-SW-3 standards. Both standards support the basic
zoning functionalities explained in the previous section and the enhanced zoning functionalities described in
this section.
About Enhanced Zoning
Table 8: Advantages of Enhanced Zoning , on page 113 lists the advantages of the enhanced zoning feature
in all switches in the Cisco MDS 9000 Series.
Cisco MDS 9000 Series Fabric Configuration Guide, Release 8.x
112
Configuring and Managing Zones
Enhanced Zoning

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available