Disables the transmission of multiple name server entry change notification in one Messaging and Transaction Services
(MTS) payload.
Disabling Name Server Bulk Notification for NX-OS Release 6.2(9)
To disable the name server bulk notification, follow these steps for NX-OS Release 6.2(9) and later:
Step 1 switch# config t
Enters configuration mode.
Step 2 switch(config)# fcns no-bulk-notify
switch(config)#
Disables the transmission of multiple name server entry change notification in one Messaging and Transaction Services
(MTS) payload.
Re-enabling Name Server Bulk Notification
To re-enable once it is disabled already for NX-OS Release 6.2(9) and later, follow these steps:
Step 1 switch# config terminal
Enters configuration mode.
Step 2 switch(config)# no fcns no-bulk-notify
switch(config)#
Re-enables the transmission of multiple name server entry change notification in one Messaging and Transaction Services
(MTS) payload.
Name Server Proxy Registration
All name server registration requests are sent from the same port with a parameter that is registered or changed.
If the port that does not have the parameter, then the request is rejected.
This authorization enables WWNs to register specific parameters for another node.
Registering Name Server Proxies
To register the name server proxy, follow these steps:
Cisco MDS 9000 Series Fabric Configuration Guide, Release 8.x
215
Managing FLOGI, Name Server, FDMI, and RSCN Databases
Disabling Name Server Bulk Notification for NX-OS Release 6.2(9)
To Next Page
Loading...
Need help?
General
