Cisco MDS 9000 Series Configuration Guide

Step 2 switch# discover custom-list delete vsan 1 domain 0X123456
Deletes the specified domain ID from the custom list.
Displaying SCSI LUN Information
Use the show scsi-target and show fcns database commands to display the results of the discovery. See
Examples Displays the Discovered Targets, on page 241 to Displays Automatically Discovered Targets, on
page 243.
Displays the Discovered Targets
switch# show scsi-target status
discovery completed
This command takes several minutes to complete, especially if the fabric is large or if several devices
are slow to respond.
Note
Displays the FCNS Database
switch# show fcns database
VSAN 1:
--------------------------------------------------------------------------
FCID TYPE PWWN (VENDOR) FC4-TYPE:FEATURE
--------------------------------------------------------------------------
0xeb0000 N 21:01:00:e0:8b:2a:f6:54 (Qlogic) scsi-fcp:init
0xeb0201 NL 10:00:00:00:c9:32:8d:76 (Emulex) scsi-fcp:init
Total number of entries = 2
VSAN 7:
--------------------------------------------------------------------------
FCID TYPE PWWN (VENDOR) FC4-TYPE:FEATURE
--------------------------------------------------------------------------
0xed0001 NL 21:00:00:04:cf:fb:42:f8 (Seagate) scsi-fcp:target
Total number of entries = 1
VSAN 2002:
--------------------------------------------------------------------------
FCID TYPE PWWN (VENDOR) FC4-TYPE:FEATURE
--------------------------------------------------------------------------
0xcafe00 N 20:03:00:05:30:00:2a:20 (Cisco) FICON:CUP
Total number of entries = 1
Displays the Discovered Target Disks
switch# show scsi-target disk
--------------------------------------------------------------------------------
VSAN FCID PWWN VENDOR MODEL REV
--------------------------------------------------------------------------------
Cisco MDS 9000 Series Fabric Configuration Guide, Release 8.x
241
Discovering SCSI Targets
Displaying SCSI LUN Information

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available