Autonomous region is 0
SPF hold time is 0 msec
MinLsArrival = 1000 msec , MinLsInterval = 5000 msec
Local Domain is 0x65(101)
Number of LSRs = 3, Total Checksum = 0x0001288b
Protocol constants :
LS_REFRESH_TIME = 1800 sec
MAX_AGE = 3600 sec
Statistics counters :
Number of LSR that reached MaxAge = 0
Number of SPF computations = 7
Number of Checksum Errors = 0
Number of Transmitted packets : LSU 65 LSA 55 Hello 474 Retranmsitted LSU 0
Number of received packets : LSU 55 LSA 60 Hello 464 Error packets 10
Displaying the FSPF Database
Displays FSPF Database Information, on page 203 displays a summary of the FSPF database for a specified
VSAN. If other parameters are not specified, all LSRs in the database are displayed:
• LSR type
• Domain ID of the LSR owner
• Domain ID of the advertising router
• LSR age
• LSR incarnation member
• Number of links
You could narrow the display to obtain specific information by issuing additional parameters for the domain
ID of the LSR owner. For each interface, the following information is also available:
• Domain ID of the neighboring switch
• E port index
• Port index of the neighboring switch
• Link type and cost
Displays FSPF Database Information
switch# show fspf database vsan 1
FSPF Link State Database for VSAN 1 Domain 0x0c(12)
LSR Type = 1
Advertising domain ID = 0x0c(12)
LSR Age = 1686
LSR Incarnation number = 0x80000024
LSR Checksum = 0x3caf
Number of links = 2
NbrDomainId IfIndex NbrIfIndex Link Type Cost
-----------------------------------------------------------------------------
0x65(101) 0x0000100e 0x00001081 1 500
0x65(101) 0x0000100f 0x00001080 1 500
FSPF Link State Database for VSAN 1 Domain 0x65(101)
LSR Type = 1
Advertising domain ID = 0x65(101)
LSR Age = 1685
LSR Incarnation number = 0x80000028
LSR Checksum = 0x8443
Number of links = 6
Cisco MDS 9000 Series Fabric Configuration Guide, Release 8.x
203
Configuring Fibre Channel Routing Services and Protocols
Displaying the FSPF Database
To Next Page
Loading...
Need help?
General
