Cisco MDS 9000 Series Configuration Guide

Figure 22: Zone Log Dialog Box
Deactivating a Zoneset
To deactivate an existing zone set, follow these steps:
Step 1 Right-click the zone set you want to deactivate and then click Deactivate from the pop-up menu.
You see the Deactivate Zoneset dialog box.
Step 2 Enter deactivate in the text box and then click OK.
You see the Input dialog box.
Step 3 Enter deactivate in the text box and then click OK to deactivate the zone set.
To enable this option, you need to modify the server.properties file. Refer to the Cisco Fabric Manager
Fundamentals Configuration Guide to know more about modifying server.properties file.
Note
Displaying Zone Membership Information
To display zone membership information for members assigned to zones in Fabric Manager, follow these
steps:
Cisco MDS 9000 Series Fabric Configuration Guide, Release 8.x
64
Configuring and Managing Zones
Deactivating a Zoneset

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available