Cisco MDS 9000 Series Configuration Guide

Figure 16: Select Zone Dialog Box
Step 10 Click Add to add the zone.
Adding Zone Members
Once you create a zone, you can add members to the zone. You can add members using multiple port
identification types.
To add a member to a zone using Fabric Manager, follow these steps:
Step 1 Choose Zone > Edit Local Full Zone Database.
You see the Select VSAN dialog box.
Step 2 Select a VSAN and click OK.
You see the Edit Local Full Zone Database dialog box for the selected VSAN.
Figure 17: Edit Local Full Zone Database Dialog Box
Cisco MDS 9000 Series Fabric Configuration Guide, Release 8.x
59
Configuring and Managing Zones
Adding Zone Members

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available