Disabling Zone Server SNMP Optimization
To disable zone server-SNMP optimizations, perform the following procedure:
Step 1 Di the configuration mode:
switch # configure terminal
Step 2 Disable the zone server-SNMP optimizations:
switch(config)# no zone capability shared-db app snmp
Example
Disabling Zone Server- SNMP Optimizations
This example shows how to disable zone server-SNMP optimization:
switch(config)# no zone capability shared-db app snmp
Zone Server Delta Distribution
This feature helps distribute the difference in the zone changes between the existing zone database and the
updated zone database across all the switches in a fabric. This distribution of delta changes helps avoid large
payload distribution across switches whenever a zone database in modified.
• By default, the Zone Server Delta Distribution feature is disabled and functions in enhanced mode only.
• All the switches in a fabric should have the Zone Server Delta Distribution feature enabled. If a switch
is added to the fabric with Zone Server Delta Distribution feature disabled, it will disable the Zone Server
Delta Distribution feature on all the switches in the fabric.
• The Zone Server Delta Distribution feature is supported only on Cisco MDS switches, beginning from
Cisco MDS NX-OS Release 7.3(0)D1(1).
• The Zone Server Delta Distribution feature is not available on Interactive Voice Response (IVR)-enabled
VSANs.
Note
Enabling Zone Server Delta Distribution
To enable the distribution of data changes in a zone server, perform the following procedure:
Step 1 Enter the configuration mode:
Cisco MDS 9000 Series Fabric Configuration Guide, Release 8.x
151
Configuring and Managing Zones
Disabling Zone Server SNMP Optimization
To Next Page
Loading...
Need help?
General
