Cisco MDS 9000 Series Configuration Guide

Displays the Contents of the Fibre Channel Common Transport Query
switch# show fc-management database
--------------------------------------------------------------
VSAN PWWN FC-CT Permissions per FC services
--------------------------------------------------------------
1 01:01:01:01:01:01:01:01 Zone(RW), Unzoned-NS(RW), FCS(RW), FDMI(RW)
1 02:02:02:02:02:02:02:02 Zone(R), Unzoned-NS(R), FCS(R), FDMI(R)
1 03:03:03:03:03:03:03:03 Zone(W), Unzoned-NS(W), FCS(W), FDMI(W)
--------------------------------------------------------------
Total 3 entries
switch#
To verify the if the FC-management security feature is enabled or not, use the show fc-management
status command:
switch# show fc-management status
Mgmt Security Disabled
switch#
Default Settings
Table 28: Default FC Management Settings , on page 321 lists the default settings for the FC management
security feature in a Cisco MDS 9000 Family switch.
Table 28: Default FC Management Settings
DefaultParameters
DisabledFC-management
Cisco MDS 9000 Series Fabric Configuration Guide, Release 8.x
321
Configuring Fibre Channel Common Transport Management Security
Default Settings

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available