Displays the fctrace Information for the Specified Device Alias
switch# fctrace device-alias x vsan 1
Route present for : 21:01:00:e0:8b:2e:80:93
20:00:00:05:30:00:4a:e2(0xfffc67)
Where available, device aliases are displayed regardless of a member being configured using a
device-alias command or a zone-specific member pwwn command.
Displays Statistics for the Device Alias Application
switch# show
device-alias statistics
Device Alias Statistics
===========================================
Lock requests sent: 2
Database update requests sent: 1
Unlock requests sent: 1
Lock requests received: 1
Database update requests received: 1
Unlock requests received: 1
Lock rejects sent: 0
Database update rejects sent: 0
Unlock rejects sent: 0
Lock rejects received: 0
Database update rejects received: 0
Unlock rejects received: 0
Merge requests received: 0
Merge request rejects sent: 0
Merge responses received: 2
Merge response rejects sent: 0
Activation requests received: 0
Activation request rejects sent: 0
Activation requests sent: 2
Activation request rejects received: 0
Default Settings
Table 15: Default Device Alias Parameters , on page 171 lists the default settings for device alias parameters.
Table 15: Default Device Alias Parameters
DefaultParameters
Effective database.Database in use
Pending database.Database to accept changes
Locked with the first device alias task.Device alias fabric lock state
Cisco MDS 9000 Series Fabric Configuration Guide, Release 8.x
171
Distributing Device Alias Services
Default Settings
To Next Page
Loading...
Need help?
General
