Cisco MDS 9000 Series Configuration Guide

as in previous Cisco NX-OS releases (see Displays the LIR History as of Cisco SAN-OS Release
3.0(3), on page 278).
Displays the LIR History as of Cisco SAN-OS Release 3.0(3)
switch# show rlir history
Link incident history
----------------------------------------------------------------------------------------------------------------
Host Time Stamp Switch Time Stamp VSAN Domain Port Intf Link
Incident Loc/Rem
----------------------------------------------------------------------------------------------------------------
Sep 20 12:42:44 2006 Sep 20 12:42:44 2006 **** **** 0x0b fc1/12 Loss
of sig/sync LOC
Reported Successfully to: [0x640001] [0x640201]
Sep 20 12:42:48 2006 Sep 20 12:42:48 2006 **** **** 0x0b fc1/12 Loss
of sig/sync LOC
Reported Successfully to: [0x640001] [0x640201]
*** ** **:**:** **** Sep 20 12:42:51 2006 1001 230 0x12 **** Loss
of sig/sync REM
Reported Successfully to: [0x640001] [0x640201]
Sep 20 12:42:55 2006 Sep 20 12:42:55 2006 **** **** 0x0b fc1/12 Loss
of sig/sync LOC
Reported Successfully to: None [No Registrations]
*** ** **:**:** **** Sep 20 12:45:56 2006 1001 230 0x12 **** Loss
of sig/sync REM
Reported Successfully to: None [No Registrations]
*** ** **:**:** **** Sep 20 12:45:56 2006 1001 230 0x12 **** Loss
of sig/sync REM
Reported Successfully to: None [No Registrations]
Sep 20 12:52:45 2006 Sep 20 12:52:45 2006 **** **** 0x0b fc1/12 Loss
of sig/sync LOC
Reported Successfully to: None [No Registrations]
**** - Info not required/unavailable
Clearing RLIR Information
Use the clear rlir statistics command to clear all existing statistics for a specified VSAN.
switch# clear rlir statistics vsan 1
Use the clear rlir history command to clear the RLIR history where all link incident records are logged for
all interfaces.
switch# clear rlir history
Use the clear rlir recent interface command to clear the most recent RLIR information for a specified
interface.
switch# clear rlir recent interface fc 1/2
Use the clear rlir recent portnumber command to clear the most recent RLIR information for a specified
port number.
Cisco MDS 9000 Series Fabric Configuration Guide, Release 8.x
278
Configuring FICON
Clearing RLIR Information

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available