Cisco MDS 9000 Series

Creating FC Aliases
To create an alias, follow these steps:
Step 1 switch# configure terminal
Enters configuration mode.
Step 2 switch(config)# fcalias name AliasSample vsan 3
Example:
switch(config-fcalias)#
Configures an alias name (AliasSample).
Step 3 switch(config-fcalias)# member type value
Example:
pWWN example:
Example:
switch(config-fcalias)# member pwwn 10:00:00:23:45:67:89:ab
Example:
fWWN example:
Example:
switch(config-fcalias)# member fwwn 10:01:10:01:10:ab:cd:ef
Example:
FC ID example:
Example:
switch(config-fcalias)# member fcid 0x222222
Example:
Domain ID example:
Example:
switch(config-fcalias)# member domain-id 2 portnumber 23
Example:
IPv4 address example:
Example:
switch(config-fcalias)# member ip-address 10.15.0.0 255.255.0.0
Cisco MDS 9000 Series Fabric Configuration Guide, Release 8.x
69
Configuring and Managing Zones
Creating FC Aliases