Cisco MDS 9000 Series

NbrDomainId IfIndex NbrIfIndex Link Type Cost
-----------------------------------------------------------------------------
0xc3(195) 0x00001085 0x00001095 1 500
0xc3(195) 0x00001086 0x00001096 1 500
0xc3(195) 0x00001087 0x00001097 1 500
0xc3(195) 0x00001084 0x00001094 1 500
0x0c(12) 0x00001081 0x0000100e 1 500
0x0c(12) 0x00001080 0x0000100f 1 500
FSPF Link State Database for VSAN 1 Domain 0xc3(195)
LSR Type = 1
Advertising domain ID = 0xc3(195)
LSR Age = 1686
LSR Incarnation number = 0x80000033
LSR Checksum = 0x6799
Number of links = 4
NbrDomainId IfIndex NbrIfIndex Link Type Cost
-----------------------------------------------------------------------------
0x65(101) 0x00001095 0x00001085 1 500
0x65(101) 0x00001096 0x00001086 1 500
0x65(101) 0x00001097 0x00001087 1 500
0x65(101) 0x00001094 0x00001084 1 500
Displaying FSPF Interfaces
Displays FSPF Interface Information, on page 204 displays the following information for each selected interface.
• Link cost
• Timer values
• Neighbor’s domain ID (if known)
• Local interface number
• Remote interface number (if known)
• FSPF state of the interface
• Interface counters
Displays FSPF Interface Information
switch# show fspf vsan 1 interface fc1/1
FSPF interface fc1/1 in VSAN 1
FSPF routing administrative state is active
Interface cost is 500
Timer intervals configured, Hello 20 s, Dead 80 s, Retransmit 5 s
FSPF State is FULL
Neighbor Domain Id is 0x0c(12), Neighbor Interface index is 0x0f100000
Statistics counters :
Number of packets received : LSU 8 LSA 8 Hello 118 Error packets 0
Number of packets transmitted : LSU 8 LSA 8 Hello 119 Retransmitted LSU 0
Number of times inactivity timer expired for the interface = 0
Default Settings
Table 20: Default FSPF Settings , on page 205 lists the default settings for FSPF features.
Cisco MDS 9000 Series Fabric Configuration Guide, Release 8.x
204
Configuring Fibre Channel Routing Services and Protocols
Displaying FSPF Interfaces