Cisco MDS 9000 Series Configuration Guide

Displaying RLIR Information
The show rlir statistics command displays the complete statistics of LIRR, RLIR, and DRLIR frames. It lists
the number of frames received, sent, and rejected. Specify the VSAN ID to obtain VSAN statistics for a
specific VSAN. If you do not specify the VSAN ID, then the statistics are shown for all active VSANs (see
Examples Displays RLIR Statistics for All VSANs, on page 275 and Displays RLIR Statistics for a Specified
VSAN, on page 275).
Displays RLIR Statistics for All VSANs
switch# show rlir statistics
Statistics for VSAN: 1
------------------------
Number of LIRR received = 0
Number of LIRR ACC sent = 0
Number of LIRR RJT sent = 0
Number of RLIR sent = 0
Number of RLIR ACC received = 0
Number of RLIR RJT received = 0
Number of DRLIR received = 0
Number of DRLIR ACC sent = 0
Number of DRLIR RJT sent = 0
Number of DRLIR sent = 0
Number of DRLIR ACC received = 0
Number of DRLIR RJT received = 0
Statistics for VSAN: 100
-------------------------
Number of LIRR received = 26
Number of LIRR ACC sent = 26
Number of LIRR RJT sent = 0
Number of RLIR sent = 815
Number of RLIR ACC received = 815
Number of RLIR RJT received = 0
Number of DRLIR received = 417
Number of DRLIR ACC sent = 417
Number of DRLIR RJT sent = 0
Number of DRLIR sent = 914
Number of DRLIR ACC received = 828
Number of DRLIR RJT received = 0
Displays RLIR Statistics for a Specified VSAN
switch# show rlir statistics vsan 4
Statistics for VSAN: 4
-------------------------
Number of LIRR received = 0
Number of LIRR ACC sent = 0
Number of LIRR RJT sent = 0
Number of RLIR sent = 0
Number of RLIR ACC received = 0
Number of RLIR RJT received = 0
Number of DRLIR received = 0
Number of DRLIR ACC sent = 0
Number of DRLIR RJT sent = 0
Number of DRLIR sent = 0
Number of DRLIR ACC received = 0
Number of DRLIR RJT received = 0
Cisco MDS 9000 Series Fabric Configuration Guide, Release 8.x
275
Configuring FICON
Displaying RLIR Information

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available