Cisco MDS 9000 Series

switch(config)# no zoneset capability active mode shared-db vsan 1
Example
Disabling Zone Server-FCNS Shared Database
This example shows how to disable database sharing for the active zone set in VSAN 1:
switch(config)# no zoneset capability active mode shared-db vsan 1
SDB Deactivation success
Zone Server SNMP Optimization
This option enables zone server-scaling enhancements for Simple Network Management Protocol (SNMP)
operations, such that the zone server is not utilized for every zone query issued by the SNMP.
By default, the Zone Server-SNMP Optimization option is enabled..
Note
Enabling Zone Server SNMP Optimization
To enable zone server-scaling enhancements for SNMP operations, perform the following procedure:
Step 1 Enter the configuration mode:
switch # configure terminal
Step 2 Enable zone server-SNMP optimization:
switch(config)# zone capability shared-db app snmp
Step 3 Display the status of the configuration:
switch(config)# show running | i shared-db
Example
Enabling Zone Server- SNMP Optimizations
This example shows how to enable zone server-SNMP optimization:
switch(config)# zone capability shared-db app snmp
Cisco MDS 9000 Series Fabric Configuration Guide, Release 8.x
150
Configuring and Managing Zones
Zone Server SNMP Optimization