Cisco MDS 9000 Series

Displays Customized Discovered Targets
switch# show scsi-target custom-list
---------------
VSAN DOMAIN
---------------
1 56
Use the show scsi-target auto-poll command to verify automatic discovery of SCSI targets that
come online. The internal uuid number indicates that a CSM or an IPS module is in the chassis.
Displays Automatically Discovered Targets
switch(config)# show scsi-target auto-poll
name server polling is enabled
auto-polling is disabled, poll_start:0 poll_count:0 poll_type:0
USERS OF AUTO POLLING
---------------------
Cisco MDS 9000 Series Fabric Configuration Guide, Release 8.x
243
Discovering SCSI Targets
Displaying SCSI LUN Information