Displays the ZoneSet Information or a Specified VSAN
switch(config)# show zoneset vsan 1
zoneset name qoscfg vsan 1
zone name qos1 vsan 1
zone-attribute-group name qos1-attr-group vsan 1
pwwn 50:08:01:60:01:5d:51:11
pwwn 50:08:01:60:01:5d:51:10
pwwn 50:08:01:60:01:5d:51:13
zone name qos3 vsan 1
zone-attribute-group name qos3-attr-group vsan 1
pwwn 50:08:01:60:01:5d:51:11
pwwn 50:08:01:60:01:5d:51:12
pwwn 50:08:01:60:01:5d:51:13
zone name sb1 vsan 1
pwwn 20:0e:00:11:0d:10:dc:00
pwwn 20:0d:00:11:0d:10:da:00
pwwn 20:13:00:11:0d:15:75:00
pwwn 20:0d:00:11:0d:10:db:00
Displays the Zone Attribute Group Information for a Specified VSAN
switch# show zone-attribute-group vsan 2
zone-attribute-group name $default_zone_attr_group$ vsan 2
read-only
qos priority high
broadcast
zone-attribute-group name testattgp vsan 2
read-only
broadcast
qos priority high
Displays the fcalias Information for the Specified VSAN
switch# show fcalias vsan 2
fcalias name testfcalias vsan 2
pwwn 21:00:00:20:37:39:b0:f4
pwwn 21:00:00:20:37:6f:db:dd
pwwn 21:00:00:20:37:a6:be:2f
Displays the Zone Status for the Specified VSAN
switch(config)# show zone status vsan 1
VSAN: 1 default-zone: deny distribute: active only Interop: default
mode: basic merge-control: allow
session: none
hard-zoning: enabled broadcast: disabled
smart-zoning: disabled
rscn-format: fabric-address
activation overwrite control:disabled
Default zone:
qos: none broadcast: disabled ronly: disabled
Full Zoning Database :
DB size: 4 bytes
Zonesets:0 Zones:0 Aliases: 0
Active Zoning Database :
Database Not Available
Current Total Zone DB Usage: 4 / 2097152 bytes (0 % used)
Cisco MDS 9000 Series Fabric Configuration Guide, Release 8.x
132
Configuring and Managing Zones
Displaying Enhanced Zone Information
To Next Page
Loading...
Need help?
General
