Active Zoning Database Analysis
switch(config-zone)# show zone analysis active vsan 1
Zoning database analysis vsan 1
Active zoneset: qoscfg
Activated at: 14:40:55 UTC Mar 21 2014
Activated by: Local [ CLI ]
Default zone policy: Deny
Number of devices zoned in vsan: 8/8 (Unzoned: 0)
Number of zone members resolved: 10/18 (Unresolved: 8)
Num zones: 4
Number of IVR zones: 0
Number of IPS zones: 0
Formatted size: 328 bytes / 4096 Kb
The maximum size of the zone database per VSAN is 4096 KB.
Note
ZoneSet Analysis
switch(config-zone)# show zone analysis zoneset qoscfg vsan 1
Zoning database analysis vsan 1
Zoneset analysis: qoscfg
Num zonesets: 1
Num zones: 4
Num aliases: 0
Num attribute groups: 1
Formatted size: 480 bytes / 4096 Kb
Displays the Zone Status
switch(config-zone)# show zone status
VSAN: 1 default-zone: deny distribute: active only Interop: default
mode: basic merge-control: allow
session: none
hard-zoning: enabled broadcast: disabled
smart-zoning: disabled
rscn-format: fabric-address
activation overwrite control:disabled
Default zone:
qos: none broadcast: disabled ronly: disabled
Full Zoning Database :
DB size: 4 bytes
Zonesets:0 Zones:0 Aliases: 0
Active Zoning Database :
Database Not Available
Current Total Zone DB Usage: 4 / 2097152 bytes (0 % used)
Pending (Session) DB size:
Full DB Copy size: n/a
Active DB Copy size: n/a
SFC size: 4 / 2097152 bytes (0 % used)
Status:
VSAN: 8 default-zone: deny distribute: full Interop: default
mode: basic merge-control: allow
session: none
hard-zoning: enabled broadcast: disabled
smart-zoning: disabled
Cisco MDS 9000 Series Fabric Configuration Guide, Release 8.x
135
Configuring and Managing Zones
Zone and ZoneSet Analysis
To Next Page
Loading...
Need help?
General
