Cisco MDS 9000 Series Configuration Guide

Table 13: Default Basic Zone Parameters
DefaultParameter
Denied to all members.Default zone policy
The full zone set is not distributed.Full zone set distribute
Low.Zone-based traffic priority
Unsupported.Broadcast frames
Disabled.Enhanced zoning
Disabled.Smart zoning
Cisco MDS 9000 Series Fabric Configuration Guide, Release 8.x
153
Configuring and Managing Zones
Default Settings

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available