Cisco MDS 9000 Series Configuration Guide

Port is not blocked
Prohibited port addresses are 0,81-253,255
...
Port address 80
Port name is
Port is not blocked
Prohibited port addresses are 0,81-253,255
Port address 254
Port name is
Port is not blocked
Prohibited port addresses are 0,81-253,255
Displays All FICON Configuration Files
switch# show ficon vsan 2
Ficon information for VSAN 2
Ficon is enabled
VSAN is active
Host control is Enabled
Host offline control is Enabled
Clock alert mode is Disabled
User alert mode is Disabled
SNMP control is Disabled
Active=Saved is Disabled
Number of implemented ports are 250
Key Counter is 9
FCID last byte is 0
Date/Time is same as system time(Sun Dec 14 01:26:30.273402 1980)
Device Allegiance not locked
Codepage is us-canada
Saved configuration files
IPL
IPLFILE1
Displays the Specified Port Addresses for a FICON Configuration File
switch# show ficon vsan 2 file iplfile1 portaddress 1-7
FICON configuration file IPLFILE1 in vsan 2
Port address 1
Port name is
Port is not blocked
Prohibited port addresses are 0,241-253,255
Port address 2
Port name is
Port is not blocked
Prohibited port addresses are 0,241-253,255
Port address 3
Port name is P3
Port is not blocked
Prohibited port addresses are 0,241-253,255
...
Port address 7
Port name is
Port is not blocked
Prohibited port addresses are 0,241-253,255
Cisco MDS 9000 Series Fabric Configuration Guide, Release 8.x
293
Configuring FICON
Displaying FICON Configuration File Information

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available