Cisco MDS 9000 Series Configuration Guide

Displays Information about All the Switches in the Fabric
switch# show fabric switch information vsan 100
VSAN 1:
----------------------------------------------------------------------------
SwitchName Model Version SupMemory
----------------------------------------------------------------------------
huashan12 DS-C9148-48P-K9 5.2(2d) n/a
alishan-bgl-25 DS-C9250I-K9 6.2(5a) n/a
Hac18 DS-C9506 6.2(7) 2 GB
Hac17 DS-C9506 6.2(5) n/a
Coco1 DS-C9222I-K9 6.2(7) 1 GB
switch#
This command is not supported prior to Cisco NX-OS Release 6.2(7).
Note
SUP memory is not displayed for the switches that are running Cisco NX-OS Release prior to 6.2(7).
Note
Without the VSAN option, this command displays information about switches in all the VSANs.
Note
Cisco MDS 9000 Series Fabric Configuration Guide, Release 8.x
20
Configuring and Managing VSANs
Displaying Fabric Switch Information

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available