A53 Z0 9 0020 L En Technical documentation
Chapter : Text file & PLC
Virtual inputs (second block)
Table 50 - Variables with customizable unit/accuracy values
14.3.5
Initialization definition blocks
The beginning of these blocks is shown by the statements "{INIT1}" or "{INIT2}" depending on the level of
access (1st or 2nd level password).
A user connected in level 0 (no password) cannot read equations from, or transfer equations to, the
module.
A user connected in level 2 will get access to INIT1 and INIT2 blocks.
A user connected in level 1 will only get access to the INIT1 block.
To Next Page
Loading...
Need help?
General
