CRE Technology GENSYS 2.0 User Manual

A53 Z0 9 0020 L En Technical documentation
Chapter : Predefined configuration
63
8.8 Power Plant paralleled with several mains using MASTER
2.0 or GCR by mains
Figure 32 - Power plant paralleling with several mains
This application requires additional modules to manage the mains power supply. Additional modules can
be MASTER 2.0 (recommended) or GCR (not recommended for a new installation). MASTER 2.0 uses all-
digital technology whereas GCR uses analogue load share lines (sometimes called Parallel Lines).
This chapter is a basic overview. Full MASTER 2.0 functions can be found in the MASTER 2.0 technical
documentation.
Variable number
Variable label
Variable value
1179
Gen. number
1 to n
1147
Nb of gen.
n (>=2)
4006
Nb of Masters
1 to n
1148
Mains parallel
No ch.over
1153
Mains regul.
X
1158
Load sharing
Analog ou CAN bus
1177
Static parall.
No
1515
Deadbus manag.
Yes
1258
Load/Unl. mode
X
Table 17 - Power plant paralleling with several mains configuration

CRE Technology GENSYS 2.0 Specifications

General

Brand	CRE Technology
Model	GENSYS 2.0
Category	Control Unit
Language	English