CRE Technology GENSYS 2.0 - Figure 87 - Modbus Rights Access Screen; Table 121 - SD Card Configuration

A53 Z0 9 0020 L En Technical documentation
Chapter : Menu overview
230
Starting from firmware v4.03, advanced access rights are available:
 Activate/Inhibit Read/Write access individually on Modbus RTU or Modbus TCP
communication ports.
 Write access to date/time/counters.
 Global write access to all configuration parameters.
Figure 87 - Modbus rights access screen
Starting from firmware v4.03, “Writing to all parameters” enables access right to all configuration
parameters independently from individual “Modbus/PLC access right” that can be set on each parameter
using “Modification by variable number” menu or TXT file with password level 2. When “writing to all
parameters” is set, individual access right is not taken into account; when “writing to all parameters” is
inactive, then individual access right can be used to enable write access to one or more specific
parameters.
6/ COM6 (SD CARD)
Terminal for FLASH memory cards (SD card format).
This menu allows to set the recording time in seconds of the SD card logger (seer §15.7.1 for more details)
and download/upload text file.
Parameter
[var.num]
Comment
SD log. timer
[E4041]
Recording time in seconds.
Table 121 – SD card configuration
Module -> SD
This menu allows to download a text file from module to SD card. (see §15.7.3 for more details)
SD -> Module