CRE Technology GENSYS 2.0 User Manual

A53 Z0 9 0020 L En Technical documentation
Chapter : Protections
110
E0343
High Cool T
High water temperature detected by J1939-
MTU
E1859
E0355
Very Low Oil P
Very low oil pressure detected by J1939-MTU.
E1860
E0356
Very Hi Cool T
Very high water temperature detected by
J1939-MTU
E1861
E0358
Hi Overspeed
High overspeed detected by J1939-MTU.
E1862
E0359
Malfunct lamp
Detected by J1939-MTU.
E1863
E0363
Protect lamp
Detected by J1939-MTU.
E1864
E0386
Amber lamp
Detected by J1939-MTU.
E1865
E0403
Red lamp
Detected by J1939-MTU.
E1866
E0404
Option4Var075
Protection used by MTU-MDEC (see §15.3.3)
E1867
E0407
Option4Var078
E1868
E0414
Trame RX 1/4
E1869
E0422
Trame RX 2/2
E1870
E0426
Trame RX 2/6
E1871
E2729
Trip alarm
Overload alarm used for non-essential
consumer (see §13.15)
E0923
Table 34 – Potential Alarm/Fault list
(1) For an external start module, the alarm/fault [E2365] Engine not ready correspond to a lost of GE Ok signal [E2515].

CRE Technology GENSYS 2.0 Specifications

General

Brand	CRE Technology
Model	GENSYS 2.0
Category	Control Unit
Language	English