CRE Technology GENSYS 2.0 User Manual

A53 Z0 9 0020 L En Technical documentation
Chapter : References
241
20 References
20.1 Product reference
Reference
Description
A53Z0
GENSYS 2.0: all-in-one door-mounted genset control and paralleling unit with
integrated PLC.
A53Z1
GENSYS 2.0 CORE: all-in-one back-panel mounted genset control and paralleling unit
with integrated PLC.
A53Z2
GENSYS 2.0 LT: all-in-one genset control and paralleling unit.
Full reference follows this format: A53Z0-L00xx (xx value depends on factory installed options).
Standard product is A53Z0-L0001.
Contact your local dealer for complete reference.
20.2 Options
Each of the following options can be selected and is password activated: contact your dealer for
procedure.
OPT2: Mains paralleling option for single generator paralleled with the mains.
The most important paralleling functions are:
 Phase shift
 ROCOF
 Power management (command mode, peak shaving…)
OPT5: Disable paralleling function (AMF).
OPT7: Disable the internal start sequence.
OPT8: Transformer phase shift compensation (HV, Dyn11 …)
A watchdog option is also available using the C5 output. This option must be specified upon ordering your
unit so that CRE Technology can activate it.
Note: By default, Option 2 mains paralleling is installed on GENSYS 2.0 LT.

CRE Technology GENSYS 2.0 Specifications

General

Brand	CRE Technology
Model	GENSYS 2.0
Category	Control Unit
Language	English