CRE Technology GENSYS 2.0 User Manual

A53 Z0 9 0020 L En Technical documentation
Chapter : References
242
20.3 Accessories
CRE Technology provides a complete range of accessories to help you install and use your module. Some
examples are given below. Please contact your local distributor to help you choose adequate equipment to
fit your needs.
1/ Cables
Reference
Overview
Description
A53W1
Crossover RJ45 Ethernet cable (3m)
A40W2
DB9 female connector with 120Ω
terminal resistor/free wires.
A40W3
DB9 connector accepting double
cable connection. To be used on
multiple generators applications
A40W4
CAN/RS485 communication cable
without connectors. Length on
request.
A40W5
DB9 120Ω termination dongle
A40W8
CAN cable for 2 GENSYS 2.0
application (7m)
Table 122 - Cable reference
2/ Other equipments
Table below shows some of many other types of equipment available in the CRE Technology product range.
Reference
Description
A53X0
Manual GENSYS 2.0/MASTER 2.0 test bench.
A09Tx
GCR - digital Mains controller (ref A09T0 for 100V
AC
, A09T1 for 230V
AC
, and A09T2 for
400V
AC
).
A24Zx
CPA – Converts three phase active power measurements into a +/-20mA signal.
Exists for 100V
AC
/5A, 230V
AC
/5A, 400V
AC
/5A, 100V
AC
/1A, 230V
AC
/1A and 400V
AC
/1A
measurements.
A61Y1
BSD Plus - remote management box (GPRS, email, SMS …).
A25Z0
C2S - Auto Synchronizer and Safety Column to safely control the paralleling of two
alternating power sources.
Table 123 - CRE Technology product reference

CRE Technology GENSYS 2.0 Specifications

General

Brand	CRE Technology
Model	GENSYS 2.0
Category	Control Unit
Language	English