CRE Technology GENSYS 2.0 User Manual

A53 Z0 9 0020 L En Technical documentation
Chapter : Communication
162
15.2.3 CAN bus inhibition
Variables below are used to decide with which modules the GENSYS 2.0 should communicate power
management data.
Variable
Description (when variable is set to 1)
All firmwares
E2691
Ignore power management data from GE01
E2692
Ignore power management data from GE02
E2693
Ignore power management data from GE03
E2694
Ignore power management data from GE04
E2695
Ignore power management data from GE05
E2696
Ignore power management data from GE06
E2697
Ignore power management data from GE07
E2698
Ignore power management data from GE08
E2699
Ignore power management data from GE09
E2700
Ignore power management data from GE10
E2701
Ignore power management data from GE11
E2702
Ignore power management data from GE12
E2703
Ignore power management data from GE13
E2704
Ignore power management data from GE14
Firmware v4.00 and above only
E2705
Ignore power management data from GE15
E2706
Ignore power management data from GE16
E2885
Ignore power management data from GE17
E2886
Ignore power management data from GE18
E2887
Ignore power management data from GE19
E2888
Ignore power management data from GE20
E2889
Ignore power management data from GE21
E2890
Ignore power management data from GE22
E2891
Ignore power management data from GE23
E2892
Ignore power management data from GE24
E2893
Ignore power management data from GE25
E2894
Ignore power management data from GE26
E2895
Ignore power management data from GE27
E2896
Ignore power management data from GE28
E2897
Ignore power management data from GE29
E2898
Ignore power management data from GE30
E2899
Ignore power management data from GE31
E2900
Ignore power management data from GE32
Table 59 - CAN bus inhibition variables
If one of these variables is set to one, power management data from the corresponding GENSYS 2.0 will not
be taken into account.
COM1 CAN bus is mainly used by GENSYS 2.0 modules to send power management data
to each others. CAN bus inhibition is used to prevent one GENSYS 2.0 from taking into
account data coming from one or more specific GENSYS 2.0 units. This is especially useful
when tie breakers are used to change the configuration of the power plant (for example
from a 6 generator power plant to two power plants with 3 generators each).

CRE Technology GENSYS 2.0 Specifications

General

Brand	CRE Technology
Model	GENSYS 2.0
Category	Control Unit
Language	English